{"title":"Watson McDaniel","description":null,"products":[{"product_id":"watson-mcdaniel-td600-series-standard-thermodynamic-steam-trap-wm-td600-3-8-1-2-3-4-1-npt-stainless-steel-420f","title":"Watson McDaniel TD600 Series Standard Thermodynamic Steam Trap, WM-TD600, 3\/8\", 1\/2\", 3\/4\", 1\" NPT, Stainless Steel 420F","description":"\u003ch2\u003eWatson McDaniel TD600 Series Thermodynamic Steam Trap\u003c\/h2\u003e \u003ch2\u003eFeatures:\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eHigh pressure applications up to 600 PSIG\u003c\/li\u003e \u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e \u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (recommended above 30 PSIG)\u003c\/li\u003e \u003cli\u003eSuitable for superheated steam\u003c\/li\u003e \u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e \u003cli\u003eThree-hole balanced discharge extends life of the seat area\u003c\/li\u003e \u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003eTD600 - Non-Repairable\u003c\/h2\u003e \u003cp\u003eThe TD600 is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600L is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e \u003cp\u003eTD600 model steam traps are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. If a trap with an integral strainer is desired, the TD600S is recommended. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange connector is recommended.\u003c\/p\u003e \u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e \u003cdiv class=\"tech\"\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003cdiv class=\"specs\"\u003e \u003cdiv class=\"column\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e3\/8\" - 1\"\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eNPT\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eInsulation Cap\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e600 PSIG\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"column\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e800°F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e600 PSIG up to 800°F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e800°F @ 600 PSIG\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eTD600, TD600L\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e \u003ch2\u003eHow It Works\u003c\/h2\u003e \u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e \u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e \u003cp\u003eThe TD600L has reduced size discharge orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi. For most drip applications the 1\/2\" TD600Lshould have sufficient capacity. For higher load drip applications or if a 3\/4\" pipe connection is required, use 3\/4\" TD600Lfor best results. Choosing a model with a condensate handling capacity in the range of the specific application will prolong trap life.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eL\u003c\/strong\u003e = Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/li\u003e \u003cli\u003eApplication: 500 lbs\/hr at 100 PSIG working inlet pressure\u003c\/li\u003e \u003cli\u003eSize\/Model: 3\/4\" TD600L-13-N\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eOptions\u003c\/h2\u003e \u003cp\u003eAn insulation cap is available to reduce cycle rates and steam\u0026amp;nbsp;loss in rain, snow, or cold environments.\u003c\/p\u003e \u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e \u003cp\u003eThe TD600 can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. The one piece Body-Seat design is extremely simple and economical; however, this configuration is generally considered non-repairable since the seat cannot be repaired if damaged or worn. Welding of trap body directly into pipeline is not recommended since excessive heat may cause distortion of the seat area. The TD600 does not contain an integral strainer and separate strainer should therefore be installed to protect from dirt and pipe scale. If a fully in-line repairable design or a trap that can be welded into pipeline is desired, the TD700S, TD900S or the UTD450 with Universal Quick-Change connector is recommended.\u003c\/p\u003e \u003ch2\u003eSample Specification\u003c\/h2\u003e \u003cp\u003eThe steam trap shall be a thermodynamic disc type with all stainless steel construction. Integral seat design and disc to be hardened for long service life. Unit shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e \u003ch2\u003e \u003c\/h2\u003e \u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494006\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165666308174,"sku":"WM-TD600","price":146.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600-Thermodynamic-Steam-Trap__79012.1784299779.1280.1280.png?v=1786660919"},{"product_id":"3-8-watson-mcdaniel-td600-11-n-standard-thermodynamic-steam-trap-stainless-steel-420f-npt","title":"3\/8\" Watson McDaniel TD600-11-N Standard Thermodynamic Steam Trap, Stainless Steel 420F, NPT","description":"\u003ch2\u003eWatson McDaniel TD600-11-N Thermodynamic Steam Trap\u003c\/h2\u003e \u003ch2\u003eFeatures:\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eHigh pressure applications up to 600 PSIG\u003c\/li\u003e \u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e \u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (recommended above 30 PSIG)\u003c\/li\u003e \u003cli\u003eSuitable for superheated steam\u003c\/li\u003e \u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e \u003cli\u003eThree-hole balanced discharge extends life of the seat area\u003c\/li\u003e \u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003eTD600 - Non-Repairable\u003c\/h2\u003e \u003cp\u003eThe TD600 is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600L is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e \u003cp\u003eTD600 model steam traps are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. If a trap with an integral strainer is desired, the TD600S is recommended. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange connector is recommended.\u003c\/p\u003e \u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e \u003cdiv class=\"tech\"\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003cdiv class=\"specs\"\u003e \u003cdiv class=\"column\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e3\/8\" - 1\"\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eNPT\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eInsulation Cap\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e600 PSIG\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"column\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e800°F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e600 PSIG up to 800°F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e800°F @ 600 PSIG\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eTD600, TD600L\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eTD600-11-N\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e \u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494006\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165666472014,"sku":"TD600-11-N","price":146.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600-Thermodynamic-Steam-Trap__25802.1784299709.1280.1280.png?v=1786660922"},{"product_id":"1-2-watson-mcdaniel-td600-12-n-standard-thermodynamic-steam-trap-stainless-steel-420f-npt","title":"1\/2\" Watson McDaniel TD600-12-N Standard Thermodynamic Steam Trap, Stainless Steel 420F, NPT","description":"\u003ch2\u003eWatson McDaniel TD600-12-N Thermodynamic Steam Trap\u003c\/h2\u003e \u003ch2\u003eFeatures:\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eHigh pressure applications up to 600 PSIG\u003c\/li\u003e \u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e \u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (recommended above 30 PSIG)\u003c\/li\u003e \u003cli\u003eSuitable for superheated steam\u003c\/li\u003e \u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e \u003cli\u003eThree-hole balanced discharge extends life of the seat area\u003c\/li\u003e \u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003eTD600 - Non-Repairable\u003c\/h2\u003e \u003cp\u003eThe TD600 is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600L is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e \u003cp\u003eTD600 model steam traps are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. If a trap with an integral strainer is desired, the TD600S is recommended. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange connector is recommended.\u003c\/p\u003e \u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e \u003cdiv class=\"tech\"\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003cdiv class=\"specs\"\u003e \u003cdiv class=\"column\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e3\/8\" - 1\"\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eNPT\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eInsulation Cap\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e600 PSIG\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"column\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e800°F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e600 PSIG up to 800°F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e800°F @ 600 PSIG\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eTD600, TD600L\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eTD600-12-N\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e \u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494006\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165668864078,"sku":"TD600-12-N","price":212.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600-Thermodynamic-Steam-Trap__31931.1784299709.1280.1280.png?v=1786660924"},{"product_id":"3-4-watson-mcdaniel-td600-13-n-standard-thermodynamic-steam-trap-stainless-steel-420f-npt","title":"3\/4\" Watson McDaniel TD600-13-N Standard Thermodynamic Steam Trap, Stainless Steel 420F, NPT","description":"\u003ch2\u003eWatson McDaniel TD600-13-N Thermodynamic Steam Trap\u003c\/h2\u003e \u003ch2\u003eFeatures:\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eHigh pressure applications up to 600 PSIG\u003c\/li\u003e \u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e \u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (recommended above 30 PSIG)\u003c\/li\u003e \u003cli\u003eSuitable for superheated steam\u003c\/li\u003e \u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e \u003cli\u003eThree-hole balanced discharge extends life of the seat area\u003c\/li\u003e \u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003eTD600 - Non-Repairable\u003c\/h2\u003e \u003cp\u003eThe TD600 is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600L is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e \u003cp\u003eTD600 model steam traps are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. If a trap with an integral strainer is desired, the TD600S is recommended. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange connector is recommended.\u003c\/p\u003e \u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e \u003cdiv class=\"tech\"\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003cdiv class=\"specs\"\u003e \u003cdiv class=\"column\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e3\/8\" - 1\"\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eNPT\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eInsulation Cap\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e600 PSIG\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"column\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e800°F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e600 PSIG up to 800°F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e800°F @ 600 PSIG\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eTD600, TD600L\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eTD600-13-N\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e \u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494006\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165669060686,"sku":"TD600-13-N","price":284.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600-Thermodynamic-Steam-Trap__27728.1784299709.1280.1280.png?v=1786660928"},{"product_id":"1-watson-mcdaniel-td600-14-n-standard-thermodynamic-steam-trap-stainless-steel-420f-npt","title":"1\" Watson McDaniel TD600-14-N Standard Thermodynamic Steam Trap, Stainless Steel 420F, NPT","description":"\u003ch2\u003eWatson McDaniel TD600-14-N Thermodynamic Steam Trap\u003c\/h2\u003e \u003ch2\u003eFeatures:\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eHigh pressure applications up to 600 PSIG\u003c\/li\u003e \u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e \u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (recommended above 30 PSIG)\u003c\/li\u003e \u003cli\u003eSuitable for superheated steam\u003c\/li\u003e \u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e \u003cli\u003eThree-hole balanced discharge extends life of the seat area\u003c\/li\u003e \u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003eTD600 - Non-Repairable\u003c\/h2\u003e \u003cp\u003eThe TD600 is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600L is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e \u003cp\u003eTD600 model steam traps are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. If a trap with an integral strainer is desired, the TD600S is recommended. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange connector is recommended.\u003c\/p\u003e \u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e \u003cdiv class=\"tech\"\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003cdiv class=\"specs\"\u003e \u003cdiv class=\"column\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e3\/8\" - 1\"\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eNPT\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eInsulation Cap\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e600 PSIG\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"column\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e800°F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e600 PSIG up to 800°F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e800°F @ 600 PSIG\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eTD600, TD600L\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eTD600-14-N\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e \u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494006\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165669224526,"sku":"TD600-14-N","price":390.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600-Thermodynamic-Steam-Trap__78685.1784299709.1280.1280.png?v=1786660930"},{"product_id":"1-2-watson-mcdaniel-td600l-12-n-high-pressure-thermodynamic-steam-trap-stainless-steel-420f-reduced-size-discharge-orifice-npt","title":"1\/2\" Watson McDaniel TD600L-12-N High-Pressure Thermodynamic Steam Trap, Stainless Steel 420F, Reduced Size Discharge Orifice, NPT","description":"\u003ch2\u003eWatson McDaniel TD600L-12-N Thermodynamic Steam Trap\u003c\/h2\u003e \u003ch2\u003eFeatures:\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eHigh pressure applications up to 600 PSIG\u003c\/li\u003e \u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e \u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (recommended above 30 PSIG)\u003c\/li\u003e \u003cli\u003eSuitable for superheated steam\u003c\/li\u003e \u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e \u003cli\u003eThree-hole balanced discharge extends life of the seat area\u003c\/li\u003e \u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003eTD600 - Non-Repairable\u003c\/h2\u003e \u003cp\u003eThe TD600 is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600L is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e \u003cp\u003eTD600 model steam traps are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. If a trap with an integral strainer is desired, the TD600S is recommended. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange connector is recommended.\u003c\/p\u003e \u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e \u003cdiv class=\"tech\"\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003cdiv class=\"specs\"\u003e \u003cdiv class=\"column\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e3\/8\" - 1\"\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eNPT\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eInsulation Cap\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e600 PSIG\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"column\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e800°F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e600 PSIG up to 800°F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e800°F @ 600 PSIG\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eTD600, TD600L\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eTD600L-12-N\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e \u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494006\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165669519438,"sku":"TD600L-12-N","price":191.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600-Thermodynamic-Steam-Trap__42662.1784299779.1280.1280.png?v=1786660933"},{"product_id":"3-4-watson-mcdaniel-td600l-13-n-high-pressure-thermodynamic-steam-trap-stainless-steel-420f-reduced-size-discharge-orifice-npt","title":"3\/4\" Watson McDaniel TD600L-13-N High-Pressure Thermodynamic Steam Trap, Stainless Steel 420F, Reduced Size Discharge Orifice. NPT","description":"\u003ch2\u003eWatson McDaniel TD600L-13-N Thermodynamic Steam Trap\u003c\/h2\u003e \u003ch2\u003eFeatures:\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eHigh pressure applications up to 600 PSIG\u003c\/li\u003e \u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e \u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (recommended above 30 PSIG)\u003c\/li\u003e \u003cli\u003eSuitable for superheated steam\u003c\/li\u003e \u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e \u003cli\u003eThree-hole balanced discharge extends life of the seat area\u003c\/li\u003e \u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003eTD600 - Non-Repairable\u003c\/h2\u003e \u003cp\u003eThe TD600 is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600L is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e \u003cp\u003eTD600 model steam traps are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. If a trap with an integral strainer is desired, the TD600S is recommended. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange connector is recommended.\u003c\/p\u003e \u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e \u003cdiv class=\"tech\"\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003cdiv class=\"specs\"\u003e \u003cdiv class=\"column\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e3\/8\" - 1\"\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eNPT\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eInsulation Cap\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e600 PSIG\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"column\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e800°F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e600 PSIG up to 800°F\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003e800°F @ 600 PSIG\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eTD600, TD600L\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e \u003cdiv class=\"right\"\u003e \u003cdiv\u003eTD600L-13-N\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e \u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494006\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165669683278,"sku":"TD600L-13-N","price":255.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600-Thermodynamic-Steam-Trap__41851.1784299739.1280.1280.png?v=1786660936"},{"product_id":"watson-mcdaniel-td600s-series-standard-thermodynamic-steam-trap-wm-td600s-1-2-3-4-npt-non-repairable-with-strainer-stainless-steel-420f","title":"Watson McDaniel TD600S Series Standard Thermodynamic Steam Trap, WM-TD600S, 1\/2\", 3\/4\", NPT, Non-Repairable With Strainer, Stainless Steel 420F","description":"\u003ch2\u003eWatson McDaniel TD600S Series Thermodynamic Steam Trap\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination.\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG.\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure.\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (Recommended above 30 PSIG)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam.\u003c\/li\u003e\n\u003cli\u003eFreezeproof when trap is piped in a vertical orientation for complete drainage of condensate.\u003c\/li\u003e\n\u003cli\u003eThree-hole balanced discharge extends life of the seat area.\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (Horizontal Preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD600S - Non-Repairable With Strainer\u003c\/h2\u003e\u003cp\u003eDRIP, TRACING: The TD600S is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Supplied with integral strainer and optional blowdown valve to protect trap from contamination. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600LS is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e\u003cp\u003eDRIP, TRACING: TD600S model steam traps with integral strainer are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. Integral strainer protects against dirt and scale. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange Connector is recommended.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600S, TD600LS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\", 3\/4\", 1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e915 PSIG up to 250°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e610°F @ 750 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e600 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD600LS has reduced size discharge orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi. For most drip applications the 1\/2\" TD600LS should have sufficient capacity. For higher load drip applications or if a 3\/4\" pipe connection is required, use 3\/4\" TD600LS for best results. Choosing a model with a condensate handling capacity in the range of the specific application will prolong trap life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eL\u003c\/strong\u003e = Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block. \u003cbr\u003eApplication: 500 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: 3\/4\" TD600LS-13-N\u003c\/p\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eAn insulation cap is available to reduce cycle rates and steam loss in rain, snow, or cold environments. Blowdown valve, used for flushing dirt and scale from strainer.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD600S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. The one piece Body-Seat design is extremely simple and economical; however, this configuration is generally considered\u0026amp;nbsp;non-repairable since the seat cannot be replaced if damaged or worn. Welding of trap body directly into pipeline is not recommended since excessive heat can cause distortion of the seat area. All models of the TD600S contain an integral strainer for protection against dirt and scale. If a fully in-line repairable design or a trap that can be welded into pipeline is desired, the TD700S, TD900S or the UTD450 with Universal Quick-Change connectors is recommended.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be all stainless steel thermodynamic type with hardened integral seat and disc with integral strainer and blowdown valve.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494013\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165669978190,"sku":"WM-TD600S","price":324.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap__87758.1784299779.1280.1280.jpg?v=1786660941"},{"product_id":"1-2-watson-mcdaniel-td600s-12-n-thermodynamic-steam-trap-standard-with-strainer-stainless-steel-420f-npt","title":"1\/2\" Watson McDaniel TD600S-12-N Thermodynamic Steam Trap, Standard With Strainer, Stainless Steel 420F, NPT","description":"\u003ch2\u003eWatson McDaniel TD600S-12-N Thermodynamic Steam Trap\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination.\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG.\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure.\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (Recommended above 30 PSIG)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam.\u003c\/li\u003e\n\u003cli\u003eFreezeproof when trap is piped in a vertical orientation for complete drainage of condensate.\u003c\/li\u003e\n\u003cli\u003eThree-hole balanced discharge extends life of the seat area.\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (Horizontal Preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD600S - Non-Repairable With Strainer\u003c\/h2\u003e\u003cp\u003eDRIP, TRACING: The TD600S is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Supplied with integral strainer and optional blowdown valve to protect trap from contamination. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600LS is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e\u003cp\u003eDRIP, TRACING: TD600S model steam traps with integral strainer are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. Integral strainer protects against dirt and scale. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange Connector is recommended.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600S, TD600LS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e915 PSIG up to 250°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e610°F @ 750 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e600 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600S-12-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD600LS has reduced size discharge orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi. For most drip applications the 1\/2\" TD600LS should have sufficient capacity. For higher load drip applications or if a 3\/4\" pipe connection is required, use 3\/4\" TD600LS for best results. Choosing a model with a condensate handling capacity in the range of the specific application will prolong trap life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eL\u003c\/strong\u003e = Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block. \u003cbr\u003eApplication: 500 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: 3\/4\" TD600LS-13-N\u003c\/p\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eAn insulation cap is available to reduce cycle rates and steam loss in rain, snow, or cold environments. Blowdown valve, used for flushing dirt and scale from strainer.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD600S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. The one piece Body-Seat design is extremely simple and economical; however, this configuration is generally considered\u0026amp;nbsp;non-repairable since the seat cannot be replaced if damaged or worn. Welding of trap body directly into pipeline is not recommended since excessive heat can cause distortion of the seat area. All models of the TD600S contain an integral strainer for protection against dirt and scale. If a fully in-line repairable design or a trap that can be welded into pipeline is desired, the TD700S, TD900S or the UTD450 with Universal Quick-Change connectors is recommended.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be all stainless steel thermodynamic type with hardened integral seat and disc with integral strainer and blowdown valve.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494013\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165670207566,"sku":"TD600S-12-N","price":324.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap__85526.1784299709.1280.1280.jpg?v=1786660943"},{"product_id":"3-4-watson-mcdaniel-td600s-13-n-thermodynamic-steam-trap-standard-with-strainer-stainless-steel-420f-npt","title":"3\/4\" Watson McDaniel TD600S-13-N Thermodynamic Steam Trap, Standard With Strainer, Stainless Steel 420F, NPT","description":"\u003ch2\u003eWatson McDaniel TD600S-13-N Thermodynamic Steam Trap\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination.\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG.\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure.\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (Recommended above 30 PSIG)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam.\u003c\/li\u003e\n\u003cli\u003eFreezeproof when trap is piped in a vertical orientation for complete drainage of condensate.\u003c\/li\u003e\n\u003cli\u003eThree-hole balanced discharge extends life of the seat area.\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (Horizontal Preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD600S - Non-Repairable With Strainer\u003c\/h2\u003e\u003cp\u003eDRIP, TRACING: The TD600S is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Supplied with integral strainer and optional blowdown valve to protect trap from contamination. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600LS is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e\u003cp\u003eDRIP, TRACING: TD600S model steam traps with integral strainer are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. Integral strainer protects against dirt and scale. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange Connector is recommended.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600S, TD600LS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e3\/4\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e915 PSIG up to 250°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e610°F @ 750 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e600 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600S-13-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD600LS has reduced size discharge orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi. For most drip applications the 1\/2\" TD600LS should have sufficient capacity. For higher load drip applications or if a 3\/4\" pipe connection is required, use 3\/4\" TD600LS for best results. Choosing a model with a condensate handling capacity in the range of the specific application will prolong trap life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eL\u003c\/strong\u003e = Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block. \u003cbr\u003eApplication: 500 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: 3\/4\" TD600LS-13-N\u003c\/p\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eAn insulation cap is available to reduce cycle rates and steam loss in rain, snow, or cold environments. Blowdown valve, used for flushing dirt and scale from strainer.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD600S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. The one piece Body-Seat design is extremely simple and economical; however, this configuration is generally considered\u0026amp;nbsp;non-repairable since the seat cannot be replaced if damaged or worn. Welding of trap body directly into pipeline is not recommended since excessive heat can cause distortion of the seat area. All models of the TD600S contain an integral strainer for protection against dirt and scale. If a fully in-line repairable design or a trap that can be welded into pipeline is desired, the TD700S, TD900S or the UTD450 with Universal Quick-Change connectors is recommended.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be all stainless steel thermodynamic type with hardened integral seat and disc with integral strainer and blowdown valve.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494013\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165671977038,"sku":"TD600S-13-N","price":394.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap__72650.1784299710.1280.1280.jpg?v=1786660946"},{"product_id":"1-2-watson-mcdaniel-td600sb-12-n-thermodynamic-steam-trap-standard-with-strainer-blowdown-valve-stainless-steel-420f-npt","title":"1\/2\" Watson McDaniel TD600SB-12-N Thermodynamic Steam Trap, Standard With Strainer \u0026 Blowdown Valve, Stainless Steel 420F, NPT","description":"\u003ch2\u003eWatson McDaniel TD600SB-12-N Thermodynamic Steam Trap\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination.\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG.\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure.\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (Recommended above 30 PSIG)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam.\u003c\/li\u003e\n\u003cli\u003eFreezeproof when trap is piped in a vertical orientation for complete drainage of condensate.\u003c\/li\u003e\n\u003cli\u003eThree-hole balanced discharge extends life of the seat area.\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (Horizontal Preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD600S - Non-Repairable With Strainer\u003c\/h2\u003e\u003cp\u003eDRIP, TRACING: The TD600S is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Supplied with integral strainer and optional blowdown valve to protect trap from contamination. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600LS is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e\u003cp\u003eDRIP, TRACING: TD600S model steam traps with integral strainer are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. Integral strainer protects against dirt and scale. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange Connector is recommended.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600S, TD600LS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e915 PSIG up to 250°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e610°F @ 750 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e600 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600SB-12-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD600LS has reduced size discharge orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi. For most drip applications the 1\/2\" TD600LS should have sufficient capacity. For higher load drip applications or if a 3\/4\" pipe connection is required, use 3\/4\" TD600LS for best results. Choosing a model with a condensate handling capacity in the range of the specific application will prolong trap life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eL\u003c\/strong\u003e = Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block. \u003cbr\u003eApplication: 500 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: 3\/4\" TD600LS-13-N\u003c\/p\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eAn insulation cap is available to reduce cycle rates and steam loss in rain, snow, or cold environments. Blowdown valve, used for flushing dirt and scale from strainer.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD600S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. The one piece Body-Seat design is extremely simple and economical; however, this configuration is generally considered\u0026amp;nbsp;non-repairable since the seat cannot be replaced if damaged or worn. Welding of trap body directly into pipeline is not recommended since excessive heat can cause distortion of the seat area. All models of the TD600S contain an integral strainer for protection against dirt and scale. If a fully in-line repairable design or a trap that can be welded into pipeline is desired, the TD700S, TD900S or the UTD450 with Universal Quick-Change connectors is recommended.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be all stainless steel thermodynamic type with hardened integral seat and disc with integral strainer and blowdown valve.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494013\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165672173646,"sku":"TD600SB-12-N","price":569.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap__51837.1784299710.1280.1280.jpg?v=1786660949"},{"product_id":"3-4-watson-mcdaniel-td600sb-13-n-thermodynamic-steam-trap-standard-with-strainer-blowdown-valve-stainless-steel-420f-npt","title":"3\/4\" Watson McDaniel TD600SB-13-N Thermodynamic Steam Trap, Standard With Strainer \u0026 Blowdown Valve, Stainless Steel 420F, NPT","description":"\u003ch2\u003eWatson McDaniel TD600SB-13-N Thermodynamic Steam Trap\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination.\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG.\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure.\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (Recommended above 30 PSIG)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam.\u003c\/li\u003e\n\u003cli\u003eFreezeproof when trap is piped in a vertical orientation for complete drainage of condensate.\u003c\/li\u003e\n\u003cli\u003eThree-hole balanced discharge extends life of the seat area.\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (Horizontal Preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD600S - Non-Repairable With Strainer\u003c\/h2\u003e\u003cp\u003eDRIP, TRACING: The TD600S is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Supplied with integral strainer and optional blowdown valve to protect trap from contamination. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600LS is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e\u003cp\u003eDRIP, TRACING: TD600S model steam traps with integral strainer are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. Integral strainer protects against dirt and scale. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange Connector is recommended.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600S, TD600LS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e3\/4\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e915 PSIG up to 250°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e610°F @ 750 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e600 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600SB-13-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD600LS has reduced size discharge orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi. For most drip applications the 1\/2\" TD600LS should have sufficient capacity. For higher load drip applications or if a 3\/4\" pipe connection is required, use 3\/4\" TD600LS for best results. Choosing a model with a condensate handling capacity in the range of the specific application will prolong trap life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eL\u003c\/strong\u003e = Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block. \u003cbr\u003eApplication: 500 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: 3\/4\" TD600LS-13-N\u003c\/p\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eAn insulation cap is available to reduce cycle rates and steam loss in rain, snow, or cold environments. Blowdown valve, used for flushing dirt and scale from strainer.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD600S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. The one piece Body-Seat design is extremely simple and economical; however, this configuration is generally considered\u0026amp;nbsp;non-repairable since the seat cannot be replaced if damaged or worn. Welding of trap body directly into pipeline is not recommended since excessive heat can cause distortion of the seat area. All models of the TD600S contain an integral strainer for protection against dirt and scale. If a fully in-line repairable design or a trap that can be welded into pipeline is desired, the TD700S, TD900S or the UTD450 with Universal Quick-Change connectors is recommended.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be all stainless steel thermodynamic type with hardened integral seat and disc with integral strainer and blowdown valve.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494013\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165672337486,"sku":"TD600SB-13-N","price":580.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap__07375.1784299739.1280.1280.jpg?v=1786660952"},{"product_id":"1-2-watson-mcdaniel-td600ls-12-n-thermodynamic-steam-trap-high-pressure-with-strainer-stainless-steel-420f-reduced-size-discharge-orifice-npt","title":"1\/2\" Watson McDaniel TD600LS-12-N Thermodynamic Steam Trap, High-Pressure WIth Strainer, Stainless Steel 420F, Reduced Size Discharge Orifice, NPT","description":"\u003ch2\u003eWatson McDaniel TD600LS-12-N Thermodynamic Steam Trap\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination.\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG.\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure.\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (Recommended above 30 PSIG)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam.\u003c\/li\u003e\n\u003cli\u003eFreezeproof when trap is piped in a vertical orientation for complete drainage of condensate.\u003c\/li\u003e\n\u003cli\u003eThree-hole balanced discharge extends life of the seat area.\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (Horizontal Preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD600S - Non-Repairable With Strainer\u003c\/h2\u003e\u003cp\u003eDRIP, TRACING: The TD600S is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Supplied with integral strainer and optional blowdown valve to protect trap from contamination. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600LS is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e\u003cp\u003eDRIP, TRACING: TD600S model steam traps with integral strainer are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. Integral strainer protects against dirt and scale. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange Connector is recommended.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600S, TD600LS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e915 PSIG up to 250°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e610°F @ 750 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e600 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600LS-12-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eLS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD600LS has reduced size discharge orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi. For most drip applications the 1\/2\" TD600LS should have sufficient capacity. For higher load drip applications or if a 3\/4\" pipe connection is required, use 3\/4\" TD600LS for best results. Choosing a model with a condensate handling capacity in the range of the specific application will prolong trap life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eL\u003c\/strong\u003e = Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block. \u003cbr\u003eApplication: 500 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: 3\/4\" TD600LS-13-N\u003c\/p\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eAn insulation cap is available to reduce cycle rates and steam loss in rain, snow, or cold environments. Blowdown valve, used for flushing dirt and scale from strainer.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD600S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. The one piece Body-Seat design is extremely simple and economical; however, this configuration is generally considered\u0026amp;nbsp;non-repairable since the seat cannot be replaced if damaged or worn. Welding of trap body directly into pipeline is not recommended since excessive heat can cause distortion of the seat area. All models of the TD600S contain an integral strainer for protection against dirt and scale. If a fully in-line repairable design or a trap that can be welded into pipeline is desired, the TD700S, TD900S or the UTD450 with Universal Quick-Change connectors is recommended.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be all stainless steel thermodynamic type with hardened integral seat and disc with integral strainer and blowdown valve.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494013\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165672501326,"sku":"TD600LS-12-N","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap__58508.1784299779.1280.1280.jpg?v=1786660955"},{"product_id":"3-4-watson-mcdaniel-td600ls-13-n-thermodynamic-steam-trap-high-pressure-with-strainer-stainless-steel-420f-reduced-size-discharge-orifice-npt","title":"3\/4\" Watson McDaniel TD600LS-13-N Thermodynamic Steam Trap, High-Pressure WIth Strainer, Stainless Steel 420F, Reduced Size Discharge Orifice, NPT","description":"\u003ch2\u003eWatson McDaniel TD600LS-13-N Thermodynamic Steam Trap\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination.\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG.\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure.\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (Recommended above 30 PSIG)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam.\u003c\/li\u003e\n\u003cli\u003eFreezeproof when trap is piped in a vertical orientation for complete drainage of condensate.\u003c\/li\u003e\n\u003cli\u003eThree-hole balanced discharge extends life of the seat area.\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (Horizontal Preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD600S - Non-Repairable With Strainer\u003c\/h2\u003e\u003cp\u003eDRIP, TRACING: The TD600S is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Supplied with integral strainer and optional blowdown valve to protect trap from contamination. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600LS is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e\u003cp\u003eDRIP, TRACING: TD600S model steam traps with integral strainer are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. Integral strainer protects against dirt and scale. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange Connector is recommended.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600S, TD600LS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e3\/4\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e915 PSIG up to 250°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e610°F @ 750 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e600 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600LS-13-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eLS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD600LS has reduced size discharge orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi. For most drip applications the 1\/2\" TD600LS should have sufficient capacity. For higher load drip applications or if a 3\/4\" pipe connection is required, use 3\/4\" TD600LS for best results. Choosing a model with a condensate handling capacity in the range of the specific application will prolong trap life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eL\u003c\/strong\u003e = Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block. \u003cbr\u003eApplication: 500 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: 3\/4\" TD600LS-13-N\u003c\/p\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eAn insulation cap is available to reduce cycle rates and steam loss in rain, snow, or cold environments. Blowdown valve, used for flushing dirt and scale from strainer.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD600S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. The one piece Body-Seat design is extremely simple and economical; however, this configuration is generally considered\u0026amp;nbsp;non-repairable since the seat cannot be replaced if damaged or worn. Welding of trap body directly into pipeline is not recommended since excessive heat can cause distortion of the seat area. All models of the TD600S contain an integral strainer for protection against dirt and scale. If a fully in-line repairable design or a trap that can be welded into pipeline is desired, the TD700S, TD900S or the UTD450 with Universal Quick-Change connectors is recommended.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be all stainless steel thermodynamic type with hardened integral seat and disc with integral strainer and blowdown valve.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494013\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165672697934,"sku":"TD600LS-13-N","price":518.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap__71110.1784299779.1280.1280.jpg?v=1786660957"},{"product_id":"1-watson-mcdaniel-td600ls-14-n-thermodynamic-steam-trap-high-pressure-with-strainer-stainless-steel-420f-reduced-size-discharge-orifice-npt","title":"1\" Watson McDaniel TD600LS-14-N Thermodynamic Steam Trap, High-Pressure WIth Strainer, Stainless Steel 420F, Reduced Size Discharge Orifice, NPT","description":"\u003ch2\u003eWatson McDaniel TD600LS-14-N Thermodynamic Steam Trap\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination.\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG.\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure.\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (Recommended above 30 PSIG)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam.\u003c\/li\u003e\n\u003cli\u003eFreezeproof when trap is piped in a vertical orientation for complete drainage of condensate.\u003c\/li\u003e\n\u003cli\u003eThree-hole balanced discharge extends life of the seat area.\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (Horizontal Preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD600S - Non-Repairable With Strainer\u003c\/h2\u003e\u003cp\u003eDRIP, TRACING: The TD600S is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Supplied with integral strainer and optional blowdown valve to protect trap from contamination. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600LS is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e\u003cp\u003eDRIP, TRACING: TD600S model steam traps with integral strainer are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. Integral strainer protects against dirt and scale. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange Connector is recommended.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600S, TD600LS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e915 PSIG up to 250°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e610°F @ 750 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e600 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600LS-14-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eLS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD600LS has reduced size discharge orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi. For most drip applications the 1\/2\" TD600LS should have sufficient capacity. For higher load drip applications or if a 3\/4\" pipe connection is required, use 3\/4\" TD600LS for best results. Choosing a model with a condensate handling capacity in the range of the specific application will prolong trap life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eL\u003c\/strong\u003e = Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block. \u003cbr\u003eApplication: 500 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: 3\/4\" TD600LS-13-N\u003c\/p\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eAn insulation cap is available to reduce cycle rates and steam loss in rain, snow, or cold environments. Blowdown valve, used for flushing dirt and scale from strainer.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD600S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. The one piece Body-Seat design is extremely simple and economical; however, this configuration is generally considered\u0026amp;nbsp;non-repairable since the seat cannot be replaced if damaged or worn. Welding of trap body directly into pipeline is not recommended since excessive heat can cause distortion of the seat area. All models of the TD600S contain an integral strainer for protection against dirt and scale. If a fully in-line repairable design or a trap that can be welded into pipeline is desired, the TD700S, TD900S or the UTD450 with Universal Quick-Change connectors is recommended.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be all stainless steel thermodynamic type with hardened integral seat and disc with integral strainer and blowdown valve.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494013\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165672763470,"sku":"TD600LS-14-N","price":605.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap__00327.1784299780.1280.1280.jpg?v=1786660960"},{"product_id":"1-2-watson-mcdaniel-td600lsb-12-n-thermodynamic-steam-trap-high-pressure-with-strainer-blowdown-valve-stainless-steel-420f-reduced-size-discharge-orifice-npt","title":"1\/2\" Watson McDaniel TD600LSB-12-N Thermodynamic Steam Trap, High-Pressure WIth Strainer \u0026 Blowdown Valve, Stainless Steel 420F, Reduced Size Discharge Orifice, NPT","description":"\u003ch2\u003eWatson McDaniel TD600LSB-12-N Thermodynamic Steam Trap\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination.\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG.\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure.\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (Recommended above 30 PSIG)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam.\u003c\/li\u003e\n\u003cli\u003eFreezeproof when trap is piped in a vertical orientation for complete drainage of condensate.\u003c\/li\u003e\n\u003cli\u003eThree-hole balanced discharge extends life of the seat area.\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (Horizontal Preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD600S - Non-Repairable With Strainer\u003c\/h2\u003e\u003cp\u003eDRIP, TRACING: The TD600S is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Supplied with integral strainer and optional blowdown valve to protect trap from contamination. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600LS is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e\u003cp\u003eDRIP, TRACING: TD600S model steam traps with integral strainer are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. Integral strainer protects against dirt and scale. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange Connector is recommended.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600S, TD600LS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e915 PSIG up to 250°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e610°F @ 750 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e600 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600LSB-12-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eLS, Blowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD600LS has reduced size discharge orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi. For most drip applications the 1\/2\" TD600LS should have sufficient capacity. For higher load drip applications or if a 3\/4\" pipe connection is required, use 3\/4\" TD600LS for best results. Choosing a model with a condensate handling capacity in the range of the specific application will prolong trap life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eL\u003c\/strong\u003e = Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block. \u003cbr\u003eApplication: 500 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: 3\/4\" TD600LS-13-N\u003c\/p\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eAn insulation cap is available to reduce cycle rates and steam loss in rain, snow, or cold environments. Blowdown valve, used for flushing dirt and scale from strainer.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD600S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. The one piece Body-Seat design is extremely simple and economical; however, this configuration is generally considered\u0026amp;nbsp;non-repairable since the seat cannot be replaced if damaged or worn. Welding of trap body directly into pipeline is not recommended since excessive heat can cause distortion of the seat area. All models of the TD600S contain an integral strainer for protection against dirt and scale. If a fully in-line repairable design or a trap that can be welded into pipeline is desired, the TD700S, TD900S or the UTD450 with Universal Quick-Change connectors is recommended.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be all stainless steel thermodynamic type with hardened integral seat and disc with integral strainer and blowdown valve.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494013\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165672829006,"sku":"TD600LSB-12-N","price":525.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap__91709.1784299857.1280.1280.jpg?v=1786660963"},{"product_id":"3-4-watson-mcdaniel-td600lsb-13-n-thermodynamic-steam-trap-high-pressure-with-strainer-blowdown-valve-stainless-steel-420f-reduced-size-discharge-orifice-npt","title":"3\/4\" Watson McDaniel TD600LSB-13-N Thermodynamic Steam Trap, High-Pressure WIth Strainer \u0026 Blowdown Valve, Stainless Steel 420F, Reduced Size Discharge Orifice, NPT","description":"\u003ch2\u003eWatson McDaniel TD600LSB-13-N Thermodynamic Steam Trap\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination.\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG.\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure.\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (Recommended above 30 PSIG)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam.\u003c\/li\u003e\n\u003cli\u003eFreezeproof when trap is piped in a vertical orientation for complete drainage of condensate.\u003c\/li\u003e\n\u003cli\u003eThree-hole balanced discharge extends life of the seat area.\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (Horizontal Preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD600S - Non-Repairable With Strainer\u003c\/h2\u003e\u003cp\u003eDRIP, TRACING: The TD600S is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Supplied with integral strainer and optional blowdown valve to protect trap from contamination. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600LS is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e\u003cp\u003eDRIP, TRACING: TD600S model steam traps with integral strainer are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. Integral strainer protects against dirt and scale. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange Connector is recommended.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600S, TD600LS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e3\/4\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e915 PSIG up to 250°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e610°F @ 750 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e600 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600LSB-13-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eLS, Blowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD600LS has reduced size discharge orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi. For most drip applications the 1\/2\" TD600LS should have sufficient capacity. For higher load drip applications or if a 3\/4\" pipe connection is required, use 3\/4\" TD600LS for best results. Choosing a model with a condensate handling capacity in the range of the specific application will prolong trap life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eL\u003c\/strong\u003e = Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block. \u003cbr\u003eApplication: 500 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: 3\/4\" TD600LS-13-N\u003c\/p\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eAn insulation cap is available to reduce cycle rates and steam loss in rain, snow, or cold environments. Blowdown valve, used for flushing dirt and scale from strainer.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD600S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. The one piece Body-Seat design is extremely simple and economical; however, this configuration is generally considered\u0026amp;nbsp;non-repairable since the seat cannot be replaced if damaged or worn. Welding of trap body directly into pipeline is not recommended since excessive heat can cause distortion of the seat area. All models of the TD600S contain an integral strainer for protection against dirt and scale. If a fully in-line repairable design or a trap that can be welded into pipeline is desired, the TD700S, TD900S or the UTD450 with Universal Quick-Change connectors is recommended.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be all stainless steel thermodynamic type with hardened integral seat and disc with integral strainer and blowdown valve.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494013\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165672894542,"sku":"TD600LSB-13-N","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap__22149.1784299857.1280.1280.jpg?v=1786660965"},{"product_id":"1-watson-mcdaniel-td600lsb-14-n-thermodynamic-steam-trap-high-pressure-with-strainer-blowdown-valve-stainless-steel-420f-reduced-size-discharge-orifice-npt","title":"1\" Watson McDaniel TD600LSB-14-N Thermodynamic Steam Trap, High-Pressure WIth Strainer \u0026 Blowdown Valve, Stainless Steel 420F, Reduced Size Discharge Orifice, NPT","description":"\u003ch2\u003eWatson McDaniel TD600LSB-14-N Thermodynamic Steam Trap\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination.\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG.\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure.\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range of 3.5-600 PSIG (Recommended above 30 PSIG)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam.\u003c\/li\u003e\n\u003cli\u003eFreezeproof when trap is piped in a vertical orientation for complete drainage of condensate.\u003c\/li\u003e\n\u003cli\u003eThree-hole balanced discharge extends life of the seat area.\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (Horizontal Preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD600S - Non-Repairable With Strainer\u003c\/h2\u003e\u003cp\u003eDRIP, TRACING: The TD600S is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Supplied with integral strainer and optional blowdown valve to protect trap from contamination. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600LS is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.\u003c\/p\u003e\u003cp\u003eDRIP, TRACING: TD600S model steam traps with integral strainer are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. Integral strainer protects against dirt and scale. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange Connector is recommended.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600S, TD600LS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eStainless Steel 420F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e915 PSIG up to 250°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e610°F @ 750 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e600 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD600LSB-14-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eLS, Blowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD600LS has reduced size discharge orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi. For most drip applications the 1\/2\" TD600LS should have sufficient capacity. For higher load drip applications or if a 3\/4\" pipe connection is required, use 3\/4\" TD600LS for best results. Choosing a model with a condensate handling capacity in the range of the specific application will prolong trap life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eL\u003c\/strong\u003e = Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressures over 150 psi.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block. \u003cbr\u003eApplication: 500 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: 3\/4\" TD600LS-13-N\u003c\/p\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eAn insulation cap is available to reduce cycle rates and steam loss in rain, snow, or cold environments. Blowdown valve, used for flushing dirt and scale from strainer.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD600S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. The one piece Body-Seat design is extremely simple and economical; however, this configuration is generally considered\u0026amp;nbsp;non-repairable since the seat cannot be replaced if damaged or worn. Welding of trap body directly into pipeline is not recommended since excessive heat can cause distortion of the seat area. All models of the TD600S contain an integral strainer for protection against dirt and scale. If a fully in-line repairable design or a trap that can be welded into pipeline is desired, the TD700S, TD900S or the UTD450 with Universal Quick-Change connectors is recommended.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be all stainless steel thermodynamic type with hardened integral seat and disc with integral strainer and blowdown valve.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494013\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165672960078,"sku":"TD600LSB-14-N","price":701.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD600S-Thermodynamic-Steam-Trap__10167.1784299857.1280.1280.jpg?v=1786660968"},{"product_id":"watson-mcdaniel-td700s-series-thermodynamic-steam-trap-wm-td700s-1-2-3-4-1-npt-standard-internal-strainer-blowdown-valve-repairable-in-line-chrome-moly-alloy-steel","title":"Watson McDaniel TD700S Series Thermodynamic Steam Trap, WM-TD700S, 1\/2\", 3\/4\", 1\" NPT, Standard Internal Strainer \u0026 Blowdown Valve, Repairable In-Line, Chrome-Moly Alloy Steel","description":"\u003ch2\u003eWatson McDaniel TD700S Series Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\", 3\/4\", 1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT, SW, FLG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165673320526,"sku":"WM-TD700S","price":638.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__74177.1774624723.1280.1280.jpg?v=1786660978"},{"product_id":"1-2-watson-mcdaniel-td700s-12-n-thermodynamic-steam-trap-standard-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-npt","title":"1\/2\" Watson McDaniel TD700S-12-N Thermodynamic Steam Trap, Standard With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, NPT","description":"\u003ch2\u003eWatson McDaniel TD700S-12-N Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S-12-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165673418830,"sku":"TD700S-12-N","price":638.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__45690.1784299780.1280.1280.jpg?v=1786660981"},{"product_id":"3-4-watson-mcdaniel-td700s-13-n-thermodynamic-steam-trap-standard-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-npt","title":"3\/4\" Watson McDaniel TD700S-13-N Thermodynamic Steam Trap, Standard With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, NPT","description":"\u003ch2\u003eWatson McDaniel TD700S-13-N Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e3\/4\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003eTD700S-13-N\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165674270798,"sku":"TD700S-13-N","price":762.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__19813.1784299780.1280.1280.jpg?v=1786660983"},{"product_id":"1-watson-mcdaniel-td700s-14-n-thermodynamic-steam-trap-standard-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-npt","title":"1\" Watson McDaniel TD700S-14-N Thermodynamic Steam Trap, Standard With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, NPT","description":"\u003ch2\u003eWatson McDaniel TD700S-14-N Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003eTD700S-14-N\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165674336334,"sku":"TD700S-14-N","price":907.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__16878.1784299739.1280.1280.jpg?v=1786660986"},{"product_id":"1-2-watson-mcdaniel-td700s-12-sw-thermodynamic-steam-trap-standard-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-socket-weld","title":"1\/2\" Watson McDaniel TD700S-12-SW Thermodynamic Steam Trap, Standard With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, Socket Weld","description":"\u003ch2\u003eWatson McDaniel TD700S-12-SW Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eSocket Weld\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S-12-SW\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165674401870,"sku":"TD700S-12-SW","price":638.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__13177.1774624724.1280.1280.jpg?v=1786660989"},{"product_id":"3-4-watson-mcdaniel-td700s-13-sw-thermodynamic-steam-trap-standard-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-socket-weld","title":"3\/4\" Watson McDaniel TD700S-13-SW Thermodynamic Steam Trap, Standard With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, Socket Weld","description":"\u003ch2\u003eWatson McDaniel TD700S-13-SW Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e3\/4\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eSocket Weld\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003eTD700S-13-SW\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165674467406,"sku":"TD700S-13-SW","price":762.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__78360.1774624725.1280.1280.jpg?v=1786660992"},{"product_id":"1-watson-mcdaniel-td700s-14-sw-thermodynamic-steam-trap-standard-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-socket-weld","title":"1\" Watson McDaniel TD700S-14-SW Thermodynamic Steam Trap, Standard With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, Socket Weld","description":"\u003ch2\u003eWatson McDaniel TD700S-14-SW Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eSocket Weld\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003eTD700S-14-SW\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165674532942,"sku":"TD700S-14-SW","price":907.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__15245.1774624725.1280.1280.jpg?v=1786660995"},{"product_id":"1-2-watson-mcdaniel-td700hs-12-n-thermodynamic-steam-trap-high-pressure-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-npt","title":"1\/2\" Watson McDaniel TD700HS-12-N Thermodynamic Steam Trap, High-Pressure With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, NPT","description":"\u003ch2\u003eWatson McDaniel TD700HS-12-N Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S-12-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eHS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165674631246,"sku":"TD700HS-12-N","price":862.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__51712.1784299780.1280.1280.jpg?v=1786660998"},{"product_id":"3-4-watson-mcdaniel-td700hs-13-n-thermodynamic-steam-trap-high-pressure-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-npt","title":"3\/4\" Watson McDaniel TD700HS-13-N Thermodynamic Steam Trap, High-Pressure With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, NPT","description":"\u003ch2\u003eWatson McDaniel TD700HS-13-N Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e3\/4\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700HS-13-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eHS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165674729550,"sku":"TD700HS-13-N","price":994.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__14139.1784299780.1280.1280.jpg?v=1786661000"},{"product_id":"1-watson-mcdaniel-td700hs-14-n-thermodynamic-steam-trap-high-pressure-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-npt","title":"1\" Watson McDaniel TD700HS-14-N Thermodynamic Steam Trap, High-Pressure With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, NPT","description":"\u003ch2\u003eWatson McDaniel TD700HS-12-N Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700HS-14-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eHS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165674795086,"sku":"TD700HS-14-N","price":1123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__26829.1784299781.1280.1280.jpg?v=1786661003"},{"product_id":"1-2-watson-mcdaniel-td700hs-12-sw-thermodynamic-steam-trap-high-pressure-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-socket-weld","title":"1\/2\" Watson McDaniel TD700HS-12-SW Thermodynamic Steam Trap, High-Pressure With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, Socket Weld","description":"\u003ch2\u003eWatson McDaniel TD700HS-12-SW Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eSocket Weld\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700HS-12-SW\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eHS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165674860622,"sku":"TD700HS-12-SW","price":862.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__73060.1774624726.1280.1280.jpg?v=1786661007"},{"product_id":"3-4-watson-mcdaniel-td700hs-13-sw-thermodynamic-steam-trap-high-pressure-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-socket-weld","title":"3\/4\" Watson McDaniel TD700HS-13-SW Thermodynamic Steam Trap, High-Pressure With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, Socket Weld","description":"\u003ch2\u003eWatson McDaniel TD700HS-13-SW Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e3\/4\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eSocket Weld\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700HS-13-SW\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eHS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165674926158,"sku":"TD700HS-13-SW","price":994.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__27349.1774624726.1280.1280.jpg?v=1786661009"},{"product_id":"1-watson-mcdaniel-td700hs-14-sw-thermodynamic-steam-trap-high-pressure-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-socket-weld","title":"1\" Watson McDaniel TD700HS-14-SW Thermodynamic Steam Trap, High-Pressure With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, Socket Weld","description":"\u003ch2\u003eWatson McDaniel TD700HS-14-SW Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eSocket Weld\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700HS-14-SW\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eHS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165674991694,"sku":"TD700HS-14-SW","price":1123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__79842.1774624726.1280.1280.jpg?v=1786661012"},{"product_id":"1-2-watson-mcdaniel-td700sb-12-n-thermodynamic-steam-trap-standard-with-internal-strainer-blowdown-valve-repairable-in-line-chrome-moly-alloy-steel-npt","title":"1\/2\" Watson McDaniel TD700SB-12-N Thermodynamic Steam Trap, Standard With Internal Strainer \u0026 Blowdown Valve, Repairable In-Line, Chrome-Moly Alloy Steel, NPT","description":"\u003ch2\u003eWatson McDaniel TD700SB-12-N Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700SB-12-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165675057230,"sku":"TD700SB-12-N","price":737.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__36115.1784299857.1280.1280.jpg?v=1786661015"},{"product_id":"3-4-watson-mcdaniel-td700sb-13-n-thermodynamic-steam-trap-standard-with-internal-strainer-blowdown-valve-repairable-in-line-chrome-moly-alloy-steel-npt","title":"3\/4\" Watson McDaniel TD700SB-13-N Thermodynamic Steam Trap, Standard With Internal Strainer \u0026 Blowdown Valve, Repairable In-Line, Chrome-Moly Alloy Steel, NPT","description":"\u003ch2\u003eWatson McDaniel TD700SB-13-N Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e3\/4\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700SB-13-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165675122766,"sku":"TD700SB-13-N","price":861.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__20298.1784299857.1280.1280.jpg?v=1786661017"},{"product_id":"1-watson-mcdaniel-td700sb-14-n-thermodynamic-steam-trap-standard-with-internal-strainer-blowdown-valve-repairable-in-line-chrome-moly-alloy-steel-npt","title":"1\" Watson McDaniel TD700SB-14-N Thermodynamic Steam Trap, Standard With Internal Strainer \u0026 Blowdown Valve, Repairable In-Line, Chrome-Moly Alloy Steel, NPT","description":"\u003ch2\u003eWatson McDaniel TD700SB-14-N Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700SB-14-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165675188302,"sku":"TD700SB-14-N","price":1063.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__92451.1784299781.1280.1280.jpg?v=1786661020"},{"product_id":"1-2-watson-mcdaniel-td700sb-12-sw-thermodynamic-steam-trap-standard-with-internal-strainer-blowdown-valve-repairable-in-line-chrome-moly-alloy-steel-socket-weld","title":"1\/2\" Watson McDaniel TD700SB-12-SW Thermodynamic Steam Trap, Standard With Internal Strainer \u0026 Blowdown Valve, Repairable In-Line, Chrome-Moly Alloy Steel, Socket Weld","description":"\u003ch2\u003eWatson McDaniel TD700SB-12-SW Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eSocket Weld\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700SB-12-SW\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165675253838,"sku":"TD700SB-12-SW","price":737.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__50483.1774624727.1280.1280.jpg?v=1786661023"},{"product_id":"3-4-watson-mcdaniel-td700sb-13-sw-thermodynamic-steam-trap-standard-with-internal-strainer-blowdown-valve-repairable-in-line-chrome-moly-alloy-steel-socket-weld","title":"3\/4\" Watson McDaniel TD700SB-13-SW Thermodynamic Steam Trap, Standard With Internal Strainer \u0026 Blowdown Valve, Repairable In-Line, Chrome-Moly Alloy Steel, Socket Weld","description":"\u003ch2\u003eWatson McDaniel TD700SB-13-SW Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e3\/4\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eSocket Weld\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700SB-13-SW\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165675319374,"sku":"TD700SB-13-SW","price":861.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__79133.1774624727.1280.1280.jpg?v=1786661026"},{"product_id":"1-watson-mcdaniel-td700sb-14-sw-thermodynamic-steam-trap-standard-with-internal-strainer-blowdown-valve-repairable-in-line-chrome-moly-alloy-steel-socket-weld","title":"1\" Watson McDaniel TD700SB-14-SW Thermodynamic Steam Trap, Standard With Internal Strainer \u0026 Blowdown Valve, Repairable In-Line, Chrome-Moly Alloy Steel, Socket Weld","description":"\u003ch2\u003eWatson McDaniel TD700SB-14-SW Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eSocket Weld\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700SB-14-SW\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165675384910,"sku":"TD700SB-14-SW","price":1063.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__58054.1774624728.1280.1280.jpg?v=1786661029"},{"product_id":"1-2-watson-mcdaniel-td700hsb-12-n-thermodynamic-steam-trap-high-pressure-with-internal-strainer-blowdown-valve-repairable-in-line-chrome-moly-alloy-steel-npt","title":"1\/2\" Watson McDaniel TD700HSB-12-N Thermodynamic Steam Trap, High-Pressure With Internal Strainer \u0026 Blowdown Valve, Repairable In-Line, Chrome-Moly Alloy Steel, NPT","description":"\u003ch2\u003eWatson McDaniel TD700HSB-12-N Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700HSB-12-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eHS, Blowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165675450446,"sku":"TD700HSB-12-N","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__73157.1784299858.1280.1280.jpg?v=1786661032"},{"product_id":"3-4-watson-mcdaniel-td700hsb-13-n-thermodynamic-steam-trap-high-pressure-with-internal-strainer-blowdown-valve-repairable-in-line-chrome-moly-alloy-steel-npt","title":"3\/4\" Watson McDaniel TD700HSB-13-N Thermodynamic Steam Trap, High-Pressure With Internal Strainer \u0026 Blowdown Valve, Repairable In-Line, Chrome-Moly Alloy Steel, NPT","description":"\u003ch2\u003eWatson McDaniel TD700HSB-13-N Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e3\/4\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700HSB-13-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eHS, Blowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165675515982,"sku":"TD700HSB-13-N","price":1084.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__24226.1784299916.1280.1280.jpg?v=1786661034"},{"product_id":"1-watson-mcdaniel-td700hsb-14-n-thermodynamic-steam-trap-high-pressure-with-internal-strainer-blowdown-valve-repairable-in-line-chrome-moly-alloy-steel-npt","title":"1\" Watson McDaniel TD700HSB-14-N Thermodynamic Steam Trap, High-Pressure With Internal Strainer \u0026 Blowdown Valve, Repairable In-Line, Chrome-Moly Alloy Steel, NPT","description":"\u003ch2\u003eWatson McDaniel TD700HSB-14-N Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700HSB-14-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eHS, Blowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165675581518,"sku":"TD700HSB-14-N","price":1356.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__06106.1784299858.1280.1280.jpg?v=1786661037"},{"product_id":"1-2-watson-mcdaniel-td700hsb-12-sw-thermodynamic-steam-trap-high-pressure-with-internal-strainer-blowdown-valve-repairable-in-line-chrome-moly-alloy-steel-socket-weld","title":"1\/2\" Watson McDaniel TD700HSB-12-SW Thermodynamic Steam Trap, High-Pressure With Internal Strainer \u0026 Blowdown Valve, Repairable In-Line, Chrome-Moly Alloy Steel, Socket Weld","description":"\u003ch2\u003eWatson McDaniel TD700HSB-12-SW Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eSocket Weld\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700HSB-12-SW\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eHS, Blowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165675647054,"sku":"TD700HSB-12-SW","price":944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__65069.1774624729.1280.1280.jpg?v=1786661040"},{"product_id":"3-4-watson-mcdaniel-td700hsb-13-sw-thermodynamic-steam-trap-high-pressure-with-internal-strainer-blowdown-valve-repairable-in-line-chrome-moly-alloy-steel-socket-weld","title":"3\/4\" Watson McDaniel TD700HSB-13-SW Thermodynamic Steam Trap, High-Pressure With Internal Strainer \u0026 Blowdown Valve, Repairable In-Line, Chrome-Moly Alloy Steel, Socket Weld","description":"\u003ch2\u003eWatson McDaniel TD700HSB-13-SW Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e3\/4\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eSocket Weld\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700HSB-13-SW\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eHS, Blowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165675810894,"sku":"TD700HSB-13-SW","price":1084.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__64607.1774624729.1280.1280.jpg?v=1786661042"},{"product_id":"1-watson-mcdaniel-td700hsb-14-sw-thermodynamic-steam-trap-high-pressure-with-internal-strainer-blowdown-valve-repairable-in-line-chrome-moly-alloy-steel-socket-weld","title":"1\" Watson McDaniel TD700HSB-14-SW Thermodynamic Steam Trap, High-Pressure With Internal Strainer \u0026 Blowdown Valve, Repairable In-Line, Chrome-Moly Alloy Steel, Socket Weld","description":"\u003ch2\u003eWatson McDaniel TD700HSB-14-SW Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eSocket Weld\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eChrome-Moly Alloy Steel\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 750°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e750°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700HSB-14-SW\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eHS, Blowdown\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494021\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165675876430,"sku":"TD700HSB-14-SW","price":1356.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__50306.1774624729.1280.1280.jpg?v=1786661045"},{"product_id":"watson-mcdaniel-tdf700s-series-thermodynamic-steam-trap-wm-tdf700s-1-2-3-4-1-npt-standard-internal-strainer-blowdown-valve-repairable-in-line-chrome-moly-alloy-steel","title":"Watson McDaniel TDF700S Series Thermodynamic Steam Trap, WM-TDF700S, 1\/2\", 3\/4\", 1\" NPT, Standard Internal Strainer \u0026 Blowdown Valve, Repairable In-Line, Chrome-Moly Alloy Steel","description":"\u003ch2\u003eWatson McDaniel TDF700S Series Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\", 3\/4\", 1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT, SW, FLG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eASME SA-182 F-11 Chrome-Moly\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e800°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 800°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e800°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TDF700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494033\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165678399566,"sku":"WM-TDF700S","price":683.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__46929.1774887608.1280.1280.jpg?v=1786661053"},{"product_id":"1-2-watson-mcdaniel-tdf700s-12-n-thermodynamic-steam-trap-standard-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-npt","title":"1\/2\" Watson McDaniel TDF700S-12-N Thermodynamic Steam Trap, Standard With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, NPT","description":"\u003ch2\u003eWatson McDaniel TDF700S-12-N Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\", 3\/4\", 1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT, SW, FLG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eASME SA-182 F-11 Chrome-Moly\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e800°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 800°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e800°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTDF700S-12-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TDF700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494033\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165678563406,"sku":"TDF700S-12-N","price":683.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__01248.1784299781.1280.1280.jpg?v=1786661056"},{"product_id":"3-4-watson-mcdaniel-tdf700s-13-n-thermodynamic-steam-trap-standard-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-npt","title":"3\/4\" Watson McDaniel TDF700S-13-N Thermodynamic Steam Trap, Standard With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, NPT","description":"\u003ch2\u003eWatson McDaniel TDF700S-13-N Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\", 3\/4\", 1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT, SW, FLG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eASME SA-182 F-11 Chrome-Moly\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e800°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 800°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e800°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTDF700S-13-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TDF700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494033\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165678628942,"sku":"TDF700S-13-N","price":816.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__85550.1784299781.1280.1280.jpg?v=1786661059"},{"product_id":"1-watson-mcdaniel-tdf700s-14-n-thermodynamic-steam-trap-standard-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-npt","title":"1\" Watson McDaniel TDF700S-14-N Thermodynamic Steam Trap, Standard With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, NPT","description":"\u003ch2\u003eWatson McDaniel TDF700S-14-N Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\", 3\/4\", 1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT, SW, FLG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eASME SA-182 F-11 Chrome-Moly\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e800°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 800°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e800°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTDF700S-14-N\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TDF700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494033\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165678760014,"sku":"TDF700S-14-N","price":972.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__68804.1784299739.1280.1280.jpg?v=1786661062"},{"product_id":"1-2-watson-mcdaniel-tdf700s-12-sw-thermodynamic-steam-trap-standard-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-socket-weld","title":"1\/2\" Watson McDaniel TDF700S-12-SW Thermodynamic Steam Trap, Standard With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, Socket Weld","description":"\u003ch2\u003eWatson McDaniel TDF700S-12-SW Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\", 3\/4\", 1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT, SW, FLG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eASME SA-182 F-11 Chrome-Moly\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e800°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 800°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e800°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTDF700S-12-SW\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TDF700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494033\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165678825550,"sku":"TDF700S-12-SW","price":683.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__10832.1774887610.1280.1280.jpg?v=1786661065"},{"product_id":"3-4-watson-mcdaniel-tdf700s-13-sw-thermodynamic-steam-trap-standard-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-socket-weld","title":"3\/4\" Watson McDaniel TDF700S-13-SW Thermodynamic Steam Trap, Standard With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, Socket Weld","description":"\u003ch2\u003eWatson McDaniel TDF700S-13-SW Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\", 3\/4\", 1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT, SW, FLG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eASME SA-182 F-11 Chrome-Moly\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e800°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 800°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e800°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTDF700S-13-SW\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TDF700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494033\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165678891086,"sku":"TDF700S-13-SW","price":816.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__18821.1774887610.1280.1280.jpg?v=1786661067"},{"product_id":"1-watson-mcdaniel-tdf700s-14-sw-thermodynamic-steam-trap-standard-with-internal-strainer-repairable-in-line-chrome-moly-alloy-steel-socket-weld","title":"1\" Watson McDaniel TDF700S-14-SW Thermodynamic Steam Trap, Standard With Internal Strainer, Repairable In-Line, Chrome-Moly Alloy Steel, Socket Weld","description":"\u003ch2\u003eWatson McDaniel TDF700S-14-SW Thermodynamic Steam Trap (Repairable In-Line)\u003c\/h2\u003e\u003ch2\u003eFeatures:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\"Quick-Replace\" capsule design for easy in-line repair\u003c\/li\u003e\n\u003cli\u003eIntegral strainer with optional blowdown valve to protect trap from contamination\u003c\/li\u003e\n\u003cli\u003eHigh pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel seat and disc for extended service life even at high pressure\u003c\/li\u003e\n\u003cli\u003eSingle trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)\u003c\/li\u003e\n\u003cli\u003eSuitable for superheated steam\u003c\/li\u003e\n\u003cli\u003eFreeze-proof when trap is piped in a vertical orientation for complete drainage of condensate\u003c\/li\u003e\n\u003cli\u003eNon-integral seat and chrome-moly body allow for trap to be welded in-line\u003c\/li\u003e\n\u003cli\u003eTrap will function in any orientation (horizontal preferred)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions \u0026amp; Features (See Specification Sheet For Full List):\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTD700S\/TDF700S - Repairable In-Line\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDRIP, TRACING:\u003c\/strong\u003e The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR) for Petroleum Industry.\u003c\/p\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"specs\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eModel\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTD700S, TD700HS\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eSizes\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e1\/2\", 3\/4\", 1\"\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eConnections\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eNPT, SW, FLG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eBody Material\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eASME SA-182 F-11 Chrome-Moly\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eOptions\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eBlowdown Valve, Insulation Cap\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMO Max. Operating Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMO Max. Operating Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e800°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePMA Max. Allowable Pressure\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e650 PSIG up to 800°F\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003eTMA Max. Allowable Temperature\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003e800°F @ 650 PSIG\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"left\"\u003ePart Number\u003c\/div\u003e\n\u003cdiv class=\"right\"\u003e\u003cdiv\u003eTDF700S-14-SW\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"clear: both;\"\u003e \u003c\/div\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe disc is the only moving part inside a thermodynamic trap. When steam enters the trap, it creates an internal pressure above the disc that instantly forces the disc to close tightly on the seat, preventing the steam from escaping. The internal steam pressure (holding the disc and seat shut) eventually drops, and the trap re-opens. When condensate enters the trap, it pushes the disc upwards, allowing the condensate to freely discharge. If steam is present, the trap instantly shuts.\u003c\/p\u003e\u003ch2\u003eSelection \/ Sizing \/ Capacities\u003c\/h2\u003e\u003cp\u003eThe TD700HS is a high pressure version of the standard TD700S model. While both the TD700S and TD700HS will operate with pressures up to 600 PSIG, the TD700HS has a slightly smaller dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1\/2\" through 1\". Replacement capsules are available, see Parts \u0026amp; Kits Section.\u003c\/p\u003e\u003cp\u003eSelect working pressure; follow column down to correct capacity (lbs\/hr) block.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExample:\u003c\/strong\u003e\u003cbr\u003eApplication: 275 lbs\/hr at 100 PSIG working inlet pressure\u003cbr\u003eSize\/Model: TD700S, specify pipe size and connections (NPT, SW, FLG)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eMaximum back pressure not to exceed 80% of inlet pressure (measured in absolute pressure) or trap may not close.\u003c\/li\u003e\n\u003cli\u003eFor optimum performance, recommended for operating pressure above 30 PSIG.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eOptions\u003c\/h2\u003e\u003cp\u003eBlowdown valve, used for flushing dirt and scale from strainer. Customized Flanged Connections:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = The high pressure version of the \u003cstrong\u003eTD700S\u003c\/strong\u003e.\u003cbr\u003eThe standard model \u003cstrong\u003eTD700S\u003c\/strong\u003e will operate over the entire pressure range, however, the \u003cstrong\u003eTD700HS\u003c\/strong\u003e will operate more efficiently and have a longer service life for pressures over 300 PSIG.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTD700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700S\u003c\/strong\u003e = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDF700HS\u003c\/strong\u003e = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOption: \u003cstrong\u003eTD700SB\u003c\/strong\u003e = Blowdown Valve\u003cbr\u003eOption: \u003cstrong\u003eTDF700SB\u003c\/strong\u003e, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.\u003c\/p\u003e\u003ch2\u003eInstallation and Maintenance\u003c\/h2\u003e\u003cp\u003eThe TD700S\/TDF700S can be installed in any orientation; however, horizontal with cap facing upward is preferred for longest service life. For maintenance, ALL internal components are easily removed and completely changed using a replacement kit. All models of the TD700S\/TDF700S contain an integral strainer for protection against dirt and scale. Available in NPT, Socket-Weld and Flange connections.\u003c\/p\u003e\u003ch2\u003eSample Specification\u003c\/h2\u003e\u003cp\u003eThe steam trap shall be a thermodynamic style in a chrome-moly alloy steel body with an integral strainer and optional blowdown valve. Unit shall have an all stainless steel in-line removable seat and disc capsule assembly. Trap shall be capable of installation in any orientation and self-draining when mounted vertically.\u003c\/p\u003e\u003ch2\u003e \u003c\/h2\u003e\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TDF700S-Thermodynamic-Steam-Trap-Spec-Sheet.pdf?v=1786494033\"\u003eView Technical Specification Sheet Here\u003c\/a\u003e\u003c\/h2\u003e","brand":"Watson McDaniel","offers":[{"title":"Default Title","offer_id":44165679775822,"sku":"TDF700S-14-SW","price":972.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/files\/Watson-McDaniel-TD700S-Thermodynamic-Steam-Trap__94395.1774887611.1280.1280.jpg?v=1786661070"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/4576\/4430\/collections\/watson_20mcdaniel_1779494645__04137.png?v=1787718753","url":"https:\/\/valveman.com\/collections\/watson-mcdaniel.oembed","provider":"ValveMan","version":"1.0","type":"link"}