3/4" Watson McDaniel TD600SB-13-N Thermodynamic Steam Trap, Standard With Strainer & Blowdown Valve, Stainless Steel 420F, NPT
Technical Specifications
General
| Model | TD600S, TD600LS |
|---|---|
| Sizes | 3/4" |
| Options | Blowdown Valve, Insulation Cap |
| Part Number | TD600SB-13-N |
| Brand | Watson McDaniel |
| Manufacturer Part # | TD600SB-13-N |
| Size | 3/4" |
| Country of Origin | Made in the United States |
Materials & Construction
| Body Material | Stainless Steel 420F |
|---|
Performance
| TMO Max. Operating Temperature | 750°F |
|---|---|
| PMA Max. Allowable Pressure | 915 PSIG up to 250°F |
| TMA Max. Allowable Temperature | 610°F @ 750 PSIG |
| PMO Max. Operating Pressure | 600 PSIG |
Connections
| Connections | NPT |
|---|
Overview
Watson McDaniel TD600SB-13-N Thermodynamic Steam Trap
Features:
- Integral strainer with optional blowdown valve to protect trap from contamination.
- High pressure applications up to 600 PSIG.
- Hardened stainless steel seat and disc for extended service life even at high pressure.
- Single trap will operate over the entire pressure range of 3.5-600 PSIG (Recommended above 30 PSIG)
- Suitable for superheated steam.
- Freezeproof when trap is piped in a vertical orientation for complete drainage of condensate.
- Three-hole balanced discharge extends life of the seat area.
- Trap will function in any orientation (Horizontal Preferred)
Options & Features (See Specification Sheet For Full List):
TD600S - Non-Repairable With Strainer
DRIP, TRACING: The TD600S is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Supplied with integral strainer and optional blowdown valve to protect trap from contamination. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600LS is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.
DRIP, TRACING: TD600S model steam traps with integral strainer are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. Integral strainer protects against dirt and scale. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange Connector is recommended.
