ControlAir Type 590X Series Manifold Mount I/P Transducer, CA-T590X-315-630-MP, Type 590X, Manifold Port, 3 - 15 to 6 - 30 Psi, 4-20 mA
Select a Model to Order This page shows the full series. Choose a specific model below to view pricing and add to cart.
Select a model above to add to cart.
Technical Specifications
General
| Input | 4-20 mA |
|---|---|
| Output Range | 3-15 psig (0.20-1.0 bar), 3-27 psig (0.20-1.8 bar), 6-30 psig (0.40-2.0 bar) |
| Air Consumption @ 85 psig (5.9 bar) supply | 4.94 scfh |
| Relative Humidity | 75% average – 95% short time non-condensing |
| Impedance | 260 Ohms @ 70°F (21°C) |
| Loop Load | 5.2 volts @ 70°F (26°C) |
| Linearity (Independent) | <+ 0.5% of span |
| Hysteresis | <+ 0.3% of span |
| Deadband | <+ 0.1% of span |
| Repeatability | <+ 0.3% of span; <+ 0.15% of span typical |
| Mounting Orientation (metric) | <+ 0.5% / 90 degree change |
| Air Supply Sensitivity (metric) | <0.6% per 25 psig (1.7 bar) change |
| Vibration Effect | <+ 1% up to 10g and 20-80 Hz. |
| Housing | Nema 1 (IP 20) |
| Media | Clean, dry, oil-free, instrument air, filtered to 40 micron |
| Mounting | Manifold |
| Brand | ControlAir |
| Manufacturer Part # | CA-T590X-315-630-MP |
| Country of Origin | Made in the United States |
Materials & Construction
| Materials (Body) | Aluminum, Plastic |
|---|---|
| Materials (Other) | Buna-N, Stainless Steel, Brass, Zinc-plated Steel, Polypropylene |
Performance
| Max. Supply Pressure | 150 psig (10 bar) |
|---|---|
| Flow Capacity @ 150 psig (10.3 bar) supply | 8.36 scfh (4.18 Nl/min) |
| Temperature Effect (metric) | <+ 0.75% / 10°F (12°C) change |
Connections
| Port Size | 3/16" NPT (M-Connection) |
|---|---|
| Electrical Connection | Terminal block |
Dimensions & Weight
| Weight | 0.75 lbs (0.34 kg.) |
|---|
Overview
ControlAir Type 590X Series 4-20mA, Manifold Mount I/P Transducer
Features:
- Small Size: Allows for dense mounting in panels.
- Vibration and Position Insensitive: Unit can mount in any plane and is stable in high vibration environments.
- Worldwide Safety Approvals: Factory Mutual (FM), Canadian Standards Association (CSA), ATEX and UKCA certifications.
- Manifold Mounting: Inlet and outlet ports or a common surface.
- Wide Operating Temperature Limits
Options & Features (See Specification Sheet For Full List):
Compact Size, Vibration Insensitive Electronic Pressure Regulator
The Type 590X Manifold Mount I/P Transducer converts a variable electrical signal to a low flow proportional pneumatic output. Its compact size, light weight and immunity to shock and vibration make it ideal for use in process control valve positioner applications.
Conversion technology utilizing open loop control and a low mass magnet produces accurate pressure control at an economical cost. The Type 590X can mount in any position and is impervious to RFI/EMI interference.
