1-1/2" NOSHOK 11 Series Sanitary Clamp Pressure Transmitters 110-12-4-615-1-55-1-8, 0 to 160 psig, Sanitary Clamp, ±0.25% Accuracy (BFSL), 4 to 20 mA, Sanitary Transducer with DIN EN 175301-803 Form A

11 Series - Sanitary Clamp Pressure Transmitters

• Current and voltage outputs available
• 316 Stainless Steel wetted parts
• Can be cleaned-in-place (CIP) or steamed-in-place (SIP)
• 3A Certified
• CE compliant to suppress RFI, EMI and ESD

Temperature Ranges

• Compensated Temperature Range
  
  • 30 to 175 ºF
  • 0 to 80 ºC
• Note for Compensated Temperature Range
• Effect ±0.01%/ºF for zero and span
• Media Temperature Range
  
  • -40 to 300 ºF
  • -40 to 150 ºC
• Ambient Temperature Range
  
  • -40 to 176 ºF
  • -40 to 80 ºC

Limitations Which Apply Are

• These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.
  
  In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.

Options and Accessories

• Options and Accessories
  
  • NBR Gaskets
    
    • 3/4" (BG-06)
    • 1-1/2" (BG-12)
    • 2" (BG-16)
  • PTFE Gaskets
    
    • 3/4" (TG-06)
    • 1-1/2" (TG-12)
    • 2" (TG-16)
  • ASME-BPE Sanitary Clamp
    
    • 3/4" (CR-06)
    • 1-1/2" (CR-12)
    • 2" (CR-16)
  • Attachable Loop Digital Indicator (1800-0) (For use with DIN EN 175301-803 Form A Electrical Connector (8) only)
• Digital Indicators:
  NOSHOK Digital Indicators provide local indication for pressure, level and temperature transmitters.
  
  • Clamp-style fittings are constructed of T304 Stainless Steel; T316 Stainless Steel on request
  • Double hinge design for easy installation and removal
  • Available in sizes from 3/4" to 4"
  • Standard pressure rating of 500 psi at 70 ºF (21 ºC); up to 3,000 psi rating on request
  • Clamp gaskets are available in NBR, EPDM, PTFE and FKM
  • All clamps and gaskets meet FDA and 3A sanitary standards
• Sanitary Clamps and Gaskets
  • ASME-BPE Sanitary Clamp
    
    • 1-1/2" (CR 12)
    • 2" (CR 16)
    • 2-1/2" (CR 20)
    • 3" (CR 24)
  • NBR Gasket
    • 1-1/2" (BG 12)
    • 2" (BG 16)
    • 2-1/2" (BG 20)
    • 3" (BG 24)
  • PTFE Gasket
    • 1-1/2" (TG 12)
    • 2" (TG 16)
    • 2-1/2" (TG 20)
    • 3" (TG 24)

Application

• Food & beverage processing
• Pasteurization systems
• Pharmaceutical
• Medical

Caution

• NOSHOK pressure transmitters or transducers are not to be used in heat sterilization systems as stated in 3A Standard 74-03 paragraph D10.1.2.
  
  Diaphragm seal must be installed facing downward or in a vertical position for drainability. Do not install diaphragm seal facing in an upward position.

Prop 65 Warnings

• WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Technical Specification Sheet Here