2-1/2" NOSHOK 1000 Series Piston Type Differential Pressure Gauge 25-1012-P30-A2P-1, 0 to 30 psid, Fluoroelastomer (FKM), Acrylic Lens, Back Connection

• Options and Accessories
  
  • (2) 1/4 20 Mounting Holes (MH)
  • Pipe Mounting Kit, Steel (MK5 CS)
  • Pipe Mounting Kit, Stainless steel (MK5 SS)
  • Reversed Ports (RP)
  • Stainless Steel Tagging (ST)
  • Wall Mounting Kit (WMK)
• 1000 Series Piston Type Differential Gauges Switch or Transmitter Type and Housing
  
  • Single Switch
  • Dual Switch
  • 4-20 mA Transmitter
• 3-Valve Differential Pressure Manifold Valves
  
  • NOSHOK's 3-Valve Differential Pressure Manifold Valves are available in Hard Seat & Soft Seat, and Hard Seat & Soft Tip.
    
    

Application

• Application
  
  • Back Flow Testing
  • Heat Exchangers
  • Filter Monitoring
  • Flow Indication
  • Level Indication
    
    

Prop 65 Warnings

• Prop 65 Warnings
  
  • WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    
    

Caution

• Caution
  Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
  
  In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
  
  

Limitations Which Apply Are

• Limitations Which Apply Are
  
  • Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
  • The pressure gauges must be operated within the following working pressure limits:
    
    • Dynamic Pressure application, 60% of the dial range
    • Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range.
  • The gauges must be operated within specified ambient temperature ranges
  • Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
    
    

Note

• Note
  
  • SPDT, 3W, 0.25 Amp, 125 Vac/Vdc (standard) (switch adjustable range of 15-95%). Other options available, consult factory.
    
    

View Valve Specification Sheet Here