NOSHOK SZ Series Stabilized & Non-Stabilized Connectors, Steel Short/Long Stabilized/Non-Stabilized Connector Pair, Flange Adapter

SZ Series - Stabilized & Non-Stabilized Connectors

• Slotted bolt holes allow for 2-1/8" and 2-1/4" bolt spacings
• Designed to reinforce the entire installation by shifting radial-stress load away from the NPT connections
• Optional dielectric barrier creates a non-conductive shield between the instrument and the orifice fitting

Related Items

• VHS, 316 Stainless Steel Vertical to Horizontal Manifold Adapter

Prop 65 Warnings

• WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Limitations Which Apply Are

• These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.
  
  In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.

Options & Accessories

• Dielectric Kits DK Series
  
  • Dielectric Kits are designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection. Dielectric Kits provide a non-conductive barrier between the process piping and the instrument and isolate components from the effects of electrical current. By eliminating metal-to-metal contact, current is halted to prevent corrosion and aid in the cathodic protection of the system.
    
    • One Piece Dielectric Gasket, Pair, Steel, Acetal (DK1)
    • One Piece Dielectric Gasket, Pair with Stainless Steel Bolts, Stainless Steel, Acetal (DK1-SS)
    • PTFE Gasket with Dielectric Shim, Pair, Steel, PTFE, PVC (DK2)
  • DK1
    
    • Single piece design combining a Acetal sealing gasket and Acetal dielectric shim
    • Bolts, washers and dielectric bushings are included with the kits
    • Cannot be used in conjunction with seal rings or o-rings
    • Seal rings or o-rings not required
  • DK2
    
    • Used as an alternative to a one-piece design when a separate sealing gasket or o-ring is required
    • Two piece design consisting of a PTFE sealing gasket and PVC dielectric shim
    • Bolts, washers and dielectric bushings are included with the kits
  • Specifications:
    
    • Material: Acetal, PVC
    • Max operating temp 150 ºF
  • Dielectric strength exceeds 1/32 air arc gap approximately 2,500 Vdc
    All 316SS products meet the requirements of NACE MR0175/ISO 15156-3.
• Direct Connect Assembly for Oil and Gas Applications
  
  • The NOSHOK Direct Connect Assembly provides an installation that keeps the meter close to the orifice taps for accurate flow measurements.

View Specification Sheet Here