Watson McDaniel FDA800-12-TCTC Thermodynamic Clean Steam, Stainless Steel Body, 150 PSIG, Trap/Air Vent, Tri-Clamp (TC x TC)

Watson McDaniel FDA800-12-TCTC Thermodynamic Clean Steam Trap 150 PSIG - 1/2" Tri-Clamp (TC x TC)

Features:

• Small and compact
• All 316L stainless steel components
• Works in any position (Horizontal Preferred).

Options & Features (See Specification Sheet For Full List):

FDA800 Series Thermodynamic Clean Steam Trap

DRIP, PROCESS: The FDA 800 Series Thermodynamic Clean Steam Traps are used in sanitary systems as drip traps on steam mains as well as for drainage on various process vessels such as separators and filters.

DRIP: The FDA800 Series thermodynamic clean steam traps are used as drip traps on steam mains in CIP/SIP systems and drainage for separators and filters.

How It Works

Using the thermodynamic properties of flash steam, this trap features a disc that is pushed open by incoming condensate, then closes tightly when steam enters the trap. Because it normally operates in an open position, condensate is continuously discharged from the line. Steam entering the trap creates an internal pressure that forces the valve to close tightly, preventing the steam from escaping.

Selection / Sizing / Capacities

The steam traps shall e a thermodynamic disc type with an all 316L stainless steel construction and integral seat design. Unit shall be capable of installation in any orientation and self-draining where mounted vertically.

Note: Maximum back pressure not to exceed 80% of inlet pressure.