Save 26%
1" Watson McDaniel TD600-14-N Standard Thermodynamic Steam Trap, Stainless Steel 420F, NPT
Technical Specifications
General
| Sizes | 3/8" - 1" |
|---|---|
| Options | Insulation Cap |
| Model | TD600, TD600L |
| Part Number | TD600-14-N |
| Brand | Watson McDaniel |
| Manufacturer Part # | TD600-14-N |
| Size | 1" |
| Country of Origin | Made in the United States |
Materials & Construction
| Body Material | Stainless Steel 420F |
|---|
Performance
| PMO Max. Operating Pressure | 600 PSIG |
|---|---|
| TMO Max. Operating Temperature | 800°F |
| PMA Max. Allowable Pressure | 600 PSIG up to 800°F |
| TMA Max. Allowable Temperature | 800°F @ 600 PSIG |
Connections
| Connections | NPT |
|---|
Overview
Watson McDaniel TD600-14-N Thermodynamic Steam Trap
Features:
- High pressure applications up to 600 PSIG
- Hardened stainless steel seat and disc for extended service life even at high pressure
- Single trap will operate over the entire pressure range of 3.5-600 PSIG (recommended above 30 PSIG)
- Suitable for superheated steam
- Freeze-proof when trap is piped in a vertical orientation for complete drainage of condensate
- Three-hole balanced discharge extends life of the seat area
- Trap will function in any orientation (horizontal preferred)
Options & Features (See Specification Sheet For Full List):
TD600 - Non-Repairable
The TD600 is Non-Repairable and commonly used as a drip trap on steam mains and steam supply lines. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. The TD600L is Reduced Size Discharge Orifice holes which are preferable in terms of performance, longevity, and efficiency; particularly on pressure over 150 psi.
TD600 model steam traps are most commonly used in drip applications, such as draining condensate from steam mains and steam supply lines. They can also be used for steam tracing applications. These traps are suitable for outdoor applications that are subject to freezing as well as superheated steam conditions. They are compact and rugged with only a single moving part. If a trap with an integral strainer is desired, the TD600S is recommended. If a fully in-line repairable design is required, the TD700S or the UTD450 with Universal QuickChange connector is recommended.
