Watson McDaniel WSTTV Series Steam Trap Test Valves, Stainless Steel Body, 150 PSIG WSP, NACE MR-01-75, 1/2", 3/4", 1" NPT
Select a Size to Order This page shows the full valve series. Choose a specific pipe size below to view pricing and add to cart.
Select a size above to add to cart.
Technical Specifications
General
| Model | WSTTV (Stainless Steel) |
|---|---|
| Sizes | 1/2", 3/4", 1" |
| Part Number | N/A |
| Brand | Watson McDaniel |
| Manufacturer Part # | WM-WSTTV |
Materials & Construction
| Body Material | Stainless Steel |
|---|
Performance
| Pressure Ratings | 150 PSIG WSP |
|---|
Connections
| Connection | NPT |
|---|
Overview
Watson McDaniel WSTTV Series Steam Trap Test Valve, 150 PSIG WSP (1/2", 3/4", 1" NPT)
Features:
- Seal Welded Construction
- Full Stainless Steel Construction
- Fully Compliant With ASME B16.34 & API 608
- NACE MR-01-75 Compliant
- Standard locking stainless steel handles.
- Single reduced bore/full porting (Depending on Size).
Options & Features (See Specification Sheet For Full List):
WSTTV Series Steam Trap Test Valve
The WSTTV Steam Trap Test Valve offers simple, immediate, and visible diagnosis of any steam trap. Turning the handle 90° to the “Test" position will direct flow of steam trap out the test port for visual evaluation of discharge. Test Valves can be installed downstream of any steam strap to visually inspect the discharge of condensate from the traps. Available in stainless steel up to 1" in size.
The WSTTV Steam Trap Test Valve offers simple, immediate, and visible diagnosis of any steam trap. Turning the handle 90° to the “Test" position will direct flow of steam trap out the test port for visual evaluation of discharge.
How It Works
With the WSTTV Steam Trap Test Valve installed downstream of the trap and in the open position, the steam trap discharges normally. A quarter-turn of the handle repositions the specially designed ball and diverts the trap discharge through a port on the bottom of the valve. Discharge can then be observed and assessments made regarding the operation of the steam trap.
Installation and Maintenance
Test Valve to be mounted on the outlet side of the steam trap. Care should be taken to ensure that the discharge port will be positioned in such a manner so as to avoid danger to personnel. NOT AN ISOLATION OR STOP VALVE.