NOSHOK 915 Series Spring-Loaded RTD With Transmitter, 915--50/750-1-C21U-8-23P1-060-2, -50ºF to 750ºF, Single 3-Wire, 4-20 mA, 1/2" NPT Male, PP White Connection Head, 1/2" NPT Conduit, 6" Stem, 1/4" Stem Diameter
Brand : NOSHOK
Starting At:
$560.99
- Size Dropdown:
- True
910/915 Series - Industrial Resistance Temperature Device (RTD) Probes With Connection Head
- Standard head-type RTD assembly
- A variety of head types are available
- Factory Mutual and Canadian Standards approved explosion proof models available
- Transmitter available, fits standard heads
Technical Specifications
Type
Probe with Connection Head
Series
915
Connection Type
Male National Pipe Thread (MNPT)
Wetted Materials
316 Stainless Steel
Lead Wires
Stranded 22 AWG standard, Polyvinyl Chloride (PVC) or Polytetrafluoroethylene (PTFE) Insulation
Temperature Ranges [Min]
-50 ºF
Temperature Ranges [Max]
750 ºF
Connection Size
1/2 in
Accuracy
±0.12% (±0.3 ºC) at 0 ºC, Class B
Element Types
PT100 Ω at 0 ºC
Circuit Types
Single, 3-Wire
Electrical Connection
Connection Head with 1/2 " National Pipe Thread (NPT) Conduit
Electrical Connection Materials
Polypropylene (PP), White
Standard Finish [Max]
32 µin
Pressure Ratings for Tube
500 psi
34.5 bar
Resistance Temperature Device (RTD) Element
PT100 Ω at 32 ºF (0 ºC), α=0.00385 International Electrotechnical Commission (IEC 751)
Self-Heating
50 mW / ºC Typical in Moving Water
Insulation Resistance
Single Element Probes: 100 mega Ω/m" at 500 Vdc, Leads to Case
Dual Element Probes: 100 mega Ω/m" at 100 Vdc, Between Element and Leads to Case
Transition
Sheath to Wire Transition Maximum Temperature 266 ºF (130 ºC)
Optional Transmitter/Output
4 to 20 mA, 2-Wire, Upscale Burnout
Environmental Protection
A1/A2:National Electrical Manufacturers Association (NEMA) 4
P1 & S1/S2:National Electrical Manufacturers Association (NEMA) 4
Warranty
3 yr
Stem Diameters
1/4 in
Stem Lengths
6 in
Stock
Yes
Application
- Industrial boilers
- Petrochemical
- Exhaust gas monitoring
- Food processing
Prop 65 Warnings
- WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Limitations Which Apply Are
- These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Additional Information
- Probe welded to fitting or spring loaded
- If used in conjunction with a thermowell, probe can be replaced in some models without possibility for leakage
- Process fitting 1/2" NPT standard, others available
- RTD PT100 Ω standard, others available
- 2, 3 or 4-wire circuit types
- Isolation to 500 Vdc
Options and Accessories
- Resistance Temperature Device (RTD) Connection Head
- Screw cover
- Meet NEMA requirements for indoor or outdoor use providing protection against dust, rain, splashing and hose-directed water
- Easy access, one-turn caps
- Accept standard and DIN terminal blocks and transmitters
- Provide greater volume for ease of field wiring
- Resistance Temperature Device (RTD) Terminal Block
- Provided with a steatite ceramic base, brass terminal pieces, and stainless steel screws
- Not rated for high voltage use
- Can be used in temperature sensor or low voltage Class 2 circuits
- Resistance Temperature Device (RTD) Transmitter
- NOSHOK's Probe Type Industrial RTD is available with a variety of fitting sizes and probe diameters.
- Thermowells
- Thermowells allow a temperature instrument to be removed and replaced without shutting down and draining the process, and reduce the possibility of damage to the temperature instrument.
Note
- Thermowells are recommended for pressure, corrosive fluids and high velocity applications.
